AgAlSe2晶体高压相变的第一性原理研究

基于密度泛函理论,采用广义梯度近似法,研究了黄铜矿结构AgAlSe₂在高压下的晶体结构、晶格动力学稳定性与电子结构.结果显示:在0 GPa时AgAlSe₂的晶格参数与实验值吻合,在13.9 GPa附近,质量密度、Se-Ag键长、Se-Al键长、晶格常数a突然增大,相对晶胞体积V/V₀、晶格常数c突然减小,声子谱出现虚频,结构变得不稳定,带隙发生突变,数值呈减小趋势.表明AgAlSe₂晶体在13.9 GPa附近发生结构相变.该研究为AgAlSe₂晶体在理论上所能承受的高压提供信息支撑.     

Geometrical methods for analyzing the optimal management of tipping point dynamics

Natural resources are not infinitely resilient and should not be modeled as being such. Finitely resilient resources feature tipping points and history dependence. This paper provides a didactical discussion of mathematical methods that are needed to understand the optimal management of such resources: viscosity solutions of Hamilton–Jacobi–Bellman equations, the costate equation and the associated canonical equations, exact root counting, and geometrical methods to analyze the geometry of the invariant manifolds of the canonical equations. Recommendations for Resource Managers

• Management of natural resources has to take into account the possible breakdown of resilience and induced regime shifts.
• Depending on the characteristics of the resource and on its present and future economic importance, either for all initial states the same kind of management policy is optimal, or the type of the optimal management policy depends on the initial state.
• Modeling should reflect the finiteness of the data.

     

EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。     

Theory of particle transport phenomena during fatigue and time-dependent fracture of materials based on mesoscale dynamics and their practical applications

In this work, the mesoscale mechanics of metals, which links their microscopic physics and macroscopic mechanics, was established. For practical applications, the laws for quantitatively predicting life of cycle and time-dependent fracture behavior such as fatigue, hydrogen embrittlement, and high-temperature creep were derived using particle transport phenomena theories such as dislocation group dynamics, hydrogen diffusion, and vacancy diffusion. Furthermore, these concepts were also applied for estimating the degree of viscoelastic deterioration of blood vessel walls, which is dominated by a time-dependent mechanism, and for the diagnosis of aneurysm accompanied by the viscoelastic deterioration of the blood vessel wall. In these theories, new mechanical indexes were derived as dominant factors for predicting the life of fatigue crack growth and the time-dependent fracture of notched specimens of materials such as hydrogen embrittlement and high-temperature creep. Furthermore, as an example of a practical application, these theories were applied to estimate the degree of viscoelastic deterioration and chaotic motions of blood vessel walls, which are closely related to blood vessel diseases such as atherosclerosis and aneurysm. Moreover, new indexes to diagnose them were also proposed for clinical applications.     

一款2 G/s采样率20 GHz带宽主从式跟踪保持电路设计研究

设计了一款全差分、20 GHz带宽主从式跟踪保持芯片(MS-THA)。该芯片采样率为2 G/s,工作带宽大于20 GHz,采用0.13μm SiGe BiCMOS工艺实现。该芯片采用传统的开关发射极跟随器(SEF)作为跟踪保持核心电路,Cherryhooper电路作为输入缓冲和输出缓冲的带宽增强核心电路,并利用交叉反馈电容抑制馈通。为了验证上述电路的有效性,设计了一个单级THA电路,测试结果为MS-THA电路提供了足够的支持。在单电源+3.3 V供电、输入直流电平为0 V,2 G/s采样率以及-3 dBm输入信号功率条件下,获得的单端输出无杂散动态范围小于-23.5 dB,总功耗约为300 mW。     

高温、高压、高应变速率动态过程晶体塑性有限元理论模型及其应用

对于高温、高压、高应变速率加载条件下的材料冲击变形行为,动态晶体塑性模型能够直接反映晶体中塑性滑移的各向异性及其对温度、压力和微观组织结构的依赖性,因而广泛应用于材料的动态冲击力学响应、微观结构演化以及动态损伤破坏的模拟。本文综述了高压冲击下动态晶体塑性有限元的理论模型,主要包括变形运动学、包含状态方程的超弹性本构模型和晶体塑性本构模型,涉及位错滑移、相变、孪生等塑性变形机制,以及层裂、绝热剪切带等动态破坏方式。     

Facile Synthesis of Enantiopure Sugar Alcohols: Asymmetric Hydrogenation and Dynamic Kinetic Resolution Combined

An unprecedented Ir/f‐amphox‐catalyzed asymmetric hydrogenation of racemic 2,3‐syn‐dihydroxy‐1,4‐diones is presented involving dynamic kinetic resolution, which produces (1R,2R,3R,4R)‐tetraols. This protocol constitutes an efficient and straightforward approach to accessing sugar alcohols bearing four contiguous stereocenters. The strategy exhibits various advantages over existing methods, including excellent yields (up to 98 %), exceptional stereoselectivities (up to 99:1 dr, 99.9 % ee), operational simplicity and substrate generality. Moreover, the nature of the reaction was revealed as a stepwise transformation by in situ Fourier‐transform infrared spectroscopy and isolation of intermediates.     

某型机进近段高精度相对姿态实时测量技术

某型机在飞行训练过程中，进近段的二维相对姿态数据对于该型机安全着陆有着至关重要的作用。基于无线网络电台的双向数据传输系统能够实时获取进近段飞机相对理想着陆点的水平、垂直相对位置数据。通过上行链路上传着陆点的姿态数据，下行链路实时下传动动差分后的差分数据,最后在中心控制站进行二次数据处理。该技术获得的进近段二维相对姿态精度达到厘米级，满足飞行训练的需求。同时结合飞机显控数据以及视景图，以多角化动态关联的方式将实时获取的姿态数据等呈现给指挥员，更好地辅助指挥员进行着陆指挥工作。     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。     

基于连续用电量和缴费时间差的客户信用动态评价模型

加大供电量和提高电费回收效率是供电商增加收益的主要途径,并且用电客户的缴费时间差直接影响着电费回收效率。在用电客户信息较少的情况下,仅仅依赖用电客户的用电量信息和缴费时间差信息,采用扩展的“S型”函数对用电量信息和缴费时间差信息进行整合建模,构建了一个能够度量客户持续用电能力和缴纳电费积极性的客户信用动态评价模型。应用构建的模型对赤峰市宁城县实际用电客户进行信用评价,评价结果与领域专家评价结果具有较高的一致性。